XQ13 100A High performance AC micro amp clamp on current probe

micro amp current probe

The model XQ13 handheld clamp on current transducer is suitable for 10A-100A cable online measurement, it belongs to high performance transducer field.



  • Suitable for 10A-100A cable online measurement.
  • Holding wire diameter: φ13mm
  • Dimension: 52.5mm×136.5mm×28mm
  • Load capacity: ≤4Ω
  • Installation: clamp type
  • Output mode: lead output


Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.1%, 0.2%
Primary current 0 - 100A AC
Secondary current 0 - 100mA AC (customized)
Max. Cont. Input current 120A
Over voltage category CAT III 600V
Output signal (AC current) From 0 to 10mA AC at nominal input current
Output signal (AC voltage) From 0 to 10mA AC at nominal input current
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz  at 1 minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output(2.5m)
Mechanical parameters
Dimensions (L x W x H) (mm) 48 x 179 x 27
Weight (g) 280
Holding wire diameter (mm) φ13
Max. jaw opening (mm) 13
Jaw color Red, yellow, blue, green, black
Material PC+ABS+Polycarbonate, UL94 V0

Download Catalogue

Related Products